Curriculum

  • 9 Sections
  • 69 Lessons
  • Lifetime
Expand all sectionsCollapse all sections
  • Module 1: Basic VSAT Theory
    An overview of VSAT theory.
    15
    • 1.1
      Course Introduction
    • 1.2
      What is VSAT?
    • 1.3
      Frequency Bands
    • 1.4
      Satellite Orbits
    • 1.5
      VSAT Link Terminology
    • 1.6
      VSAT Latency
    • 1.7
      Rain Fade
    • 1.8
      Sun Outage or Solar Transit Events
    • 1.9
      Adaptive Coding Modulation (ACM)
    • 1.10
      Linear Polarization
    • 1.11
      Circular Polarization
    • 1.12
      deciBels (dB)
    • 1.13
      DC Voltages
    • 1.14
      RF Safety
    • 1.15
      VSAT Glossary of Terms
  • Module 2: Tools, Equipment & Documentation
    As a Certified VSAT Installer you should be fairly self sufficient and carry all the tools and equipment you should need.
    10
    • 2.1
      Hand Tools
    • 2.2
      Cables
    • 2.3
      IT & Software
    • 2.4
      Test Equipment
    • 2.5
      Adaptors
    • 2.6
      Communications
    • 2.7
      Spares & Consumables
    • 2.8
      PPE
    • 2.9
      Documentation
    • 2.10
      Checklist
  • Module 3: Indoor Equipment
    An overview of all the equipment that is installed outside.
    6
    • 3.1
      Equipment Rack
    • 3.2
      UPS
    • 3.3
      SCPC Modems
    • 3.4
      Comtech Modems
    • 3.5
      Paradise Datacom
    • 3.6
      TDMA Modems
  • Module 4: Outdoor Equipment
    An overview of all the indoor equipment.
    12
    • 4.1
      Low Noise Block – LNB
    • 4.2
      Block Up Converter – BUC
    • 4.3
      RF Feed Assembly
    • 4.4
      Antenna or Sat Dish
    • 4.5
      Antenna Offset
    • 4.6
      Antenna Mounts
    • 4.7
      Non-Penetrating Mounts
    • 4.8
      RF Coax
    • 4.9
      N-Type Connector Termination
    • 4.10
      F-Type Connector Termination
    • 4.11
      Power
    • 4.12
      Grounding
  • Module 5: Stabilized and Auto-Acquire Antennas
    There are various antenna systems that search and track the satellite.
    5
    • 5.1
      Stabilized Antenna Theory
    • 5.2
      ACU Configuration
    • 5.3
      Sea Tel Antennas
    • 5.4
      Intellian
    • 5.5
      SpaceTrack Antennas
  • Module 6: Remote Sites
    Working at remote sites.
    4
    • 6.1
      Site Surveys
    • 6.2
      Arrival at Install Location
    • 6.3
      JHA and Take 5’s
    • 6.4
      Work Area
  • Module 7: Dish Alignment
    Information on how to align the satellite dish.
    4
    • 7.1
      Dish Pointing
    • 7.2
      Elevation Angle
    • 7.3
      Azimuth
    • 7.4
      Polarization
  • Module 8: Remote Commissioning
    The steps in commissioning a remote site and the tests involved.
    5
    • 8.1
      Compression Point (1dB Point) Test
    • 8.2
      Cross Polarization (XPol)
    • 8.3
      VoIP
    • 8.4
      Data
    • 8.5
      Site Documentation
  • Module 9: Fault Finding
    Common issues and faults with VSAT.
    8
    • 9.1
      Dish Pointing
    • 9.2
      Dish Movement
    • 9.3
      Low Rx Signal
    • 9.4
      Tx Power Problems
    • 9.5
      Slow Data
    • 9.6
      Poor Voice
    • 9.7
      Cross-Pol Issues
    • 9.8
      End of Course

VSAT Satellite Training Course

This content is protected, please login and enroll in the course to view this content!
Prev Previous Dish Pointing
Next Low Rx Signal Next

Sign Up or Sign In

Lost your password?

Not a member yet? Sign up now

Sign up for a new account

Already a member? Sign in now